> Stephen Warren <[email protected]> hat am 2. Dezember 2015 um 04:42
> geschrieben:
>
>
> On 11/19/2015 09:06 AM, Stefan Wahren wrote:
> > The node name of the sdhci pin group doesn't explain it's
> > real function. So rename it.
>
> The real function of this node is not to configure SDHCI pins, but to
> set pins to alt3, as the current name states. Admittedly it's possible
> that currently the only pins that need to be set to ALT3 are SDHCI
> related, but that's incidental.
Yes, i understand the original intension to assign every pin to the available
mux functions ( gpio_in, gpio_out, alt* ).
But 3f37169fb3 ("ARM: bcm2835: dt: Add Raspberry Pi Model B rev2") introduce a
better self-describing pin group naming for I2S. So my idea was to adapt it
according to sdhci first and go on.
So here is a possible vision for bcm2835-rpi.dtsi
&gpio {
pinctrl-names = "default";
act_gpio: gpio {
brcm,pins = <6>;
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
};
i2c0_alt0: i2c {
brcm,pins = <0 1>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
i2c1_alt0: i2c {
brcm,pins = <2 3>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
gpclk_alt0: gpclk {
brcm,pins = <4 5>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
spi0_alt0: spi {
brcm,pins = <7 8 9 10 11>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
uart0_alt0: spi {
brcm,pins = <14 15>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm0_alt0: pwm {
brcm,pins = <40>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
pwm1_alt0: pwm {
brcm,pins = <45>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
sdhci_alt3: sdhci_alt3 {
brcm,pins = <48 49 50 51 52 53>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
};
Best regards
Stefan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
