The parallel NOR that is attached to the i.MX6-SabreAuto WEIM switch
needs a GPIO asserted at boot in order to probe properly. Employ the
GPIO init-val mechanism to set the GPIO. Also, add partitions subnode
to NOR device-tree node to make MTD initialization work.
Alison Chaiken (2):
ARM: dts: imx6qdl-sabreauto: assert GPIO at boot in order to connect
NOR
ARM: dts: imx6qdl-sabreauto: enable partitions for parallel NOR
arch/arm/boot/dts/imx6qdl-sabreauto-eim-nor.dtsi | 43 ++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 +++
2 files changed, 47 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qdl-sabreauto-eim-nor.dtsi
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
