The current dts describes USB HUB's property at USB controller's entry, it is improper. Fix it by using a generic USB HUB entry.
Signed-off-by: Peter Chen <[email protected]> --- arch/arm/boot/dts/imx6qdl-udoo.dtsi | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 1211da8..64eabe2 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -9,6 +9,8 @@ * */ +#include <dt-bindings/gpio/gpio.h> + / { chosen { stdout-path = &uart2; @@ -18,21 +20,11 @@ reg = <0x10000000 0x40000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_h1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; + usb_hub1 { + compatible = "generic-onboard-hub"; + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <2>; }; }; @@ -119,10 +111,6 @@ }; &usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks 201>; status = "okay"; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
