The "renesas,scif" compatible value is currently used for the SCIF variant in all Renesas SoCs of the R-Car family. However, the variant used in the R-Car family is not the common "SH-4(A)" variant, but a derivative with added "Baud Rate Generator for External Clock" (BRG), which is also present in sh7734.
Use the family-specific SCIF compatible values for R-Car Gen1, Gen2, and Gen3 SoCs to differentiate. The "renesas,scif" compatible value can still be used as a common denominator for SCIF variants with the "SH-4(A)" register layout (i.e. ignoring the "Serial Extension Mode Register" (SCEMR) and the new BRG-specific registers). Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Cc: [email protected] --- v3: - Add Acked-by, - Use family-specific instead of SoC-specific compatible values. --- drivers/tty/serial/sh-sci.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 5b8504bfd42e9906..a202e4e40b8adafb 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2625,6 +2625,17 @@ static const struct of_device_id of_sci_match[] = { .compatible = "renesas,scif-r7s72100", .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH2_SCIF_FIFODATA_REGTYPE), }, + /* Family-specific types */ + { + .compatible = "renesas,rcar-gen1-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, { + .compatible = "renesas,rcar-gen2-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, { + .compatible = "renesas,rcar-gen3-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, /* Generic types */ { .compatible = "renesas,scif", -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
