On Tue, Dec 22, 2015 at 10:15:19AM +0200, Ilya Ledvich wrote:
> CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
> Freescale i.MX7 System-on-Chip family.
>
> http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/
>
> Add basic DT support for standalone module (without a carrier board):
>
> * Memory configuration
> * eMMC
> * 2x Gigabit Ethernet ports (FEC1 and FEC2)
> * I2C2 bus
> * EEPROM
> * PCA9555 GPIO extender
> * PMIC
> * UART1
> * USB OTG port
>
> Signed-off-by: Ilya Ledvich <[email protected]>
> Signed-off-by: Igor Grinberg <[email protected]>
> ---
>
> v2: use generic node name for pmic (Thanks Rob)
> move board description out of fsl.txt (Shawn)
> use GPL/X11 dual licence for newly added dts files (Shawn)
> discard one level of container node (Shawn)
> squash several patches into one patch (Shawn)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 293
> ++++++++++++++++++++++++++++++++
> 2 files changed, 294 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx7d-cl-som-imx7.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 30bbc37..83ed521 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -350,6 +350,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
> dtb-$(CONFIG_SOC_IMX6UL) += \
> imx6ul-14x14-evk.dtb
> dtb-$(CONFIG_SOC_IMX7D) += \
> + imx7d-cl-som-imx7.dtb \
> imx7d-sdb.dtb
> dtb-$(CONFIG_SOC_LS1021A) += \
> ls1021a-qds.dtb \
> diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> new file mode 100644
> index 0000000..1ec4528
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> @@ -0,0 +1,293 @@
> +/*
> + * Support for CompuLab CL-SOM-iMX7 System-on-Module
> + *
> + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
> + * Author: Ilya Ledvich <[email protected]>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include "imx7d.dtsi"
> +
> +/ {
> + model = "CompuLab CL-SOM-iMX7";
> + compatible = "compulab,cl-som-imx7", "fsl,imx7d";
> +
> + memory {
> + reg = <0x80000000 0x10000000>; /* 256 MB - minimal
> configuration */
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
DT maintainers dislike this fake "simple-bus" container, and we were
asked to put fixed regulator directly under root. I fixed it up like
below:
reg_usb_otg1_vbus: regulator-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
Shawn
> +
> + reg_usb_otg1_vbus: regulator@0 {
> + compatible = "regulator-fixed";
> + reg = <0>;
> + regulator-name = "usb_otg1_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> + };
> +};
> +
> +&cpu0 {
> + arm-supply = <&sw1a_reg>;
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet1>;
> + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
> + <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
> + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
> + assigned-clock-rates = <0>, <100000000>;
> + phy-mode = "rgmii";
> + phy-handle = <ðphy0>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + reg = <0>;
> + };
> +
> + ethphy1: ethernet-phy@1 {
> + reg = <1>;
> + };
> + };
> +};
> +
> +&fec2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet2>;
> + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
> + <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
> + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
> + assigned-clock-rates = <0>, <100000000>;
> + phy-mode = "rgmii";
> + phy-handle = <ðphy1>;
> + fsl,magic-packet;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + pmic: pmic@8 {
> + compatible = "fsl,pfuze3000";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1a {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1475000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + /* use sw1c_reg to align with pfuze100/pfuze200 */
> + sw1c_reg: sw1b {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1475000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1850000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1650000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vldo1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen2_reg: vldo2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen3_reg: vccsd {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: v33 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vldo3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vldo4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +
> + pca9555: pca9555@20 {
> + compatible = "nxp,pca9555";
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x20>;
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c08";
> + reg = <0x50>;
> + pagesize = <16>;
> + };
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1>;
> + vbus-supply = <®_usb_otg1_vbus>;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
> + assigned-clock-rates = <400000000>;
> + bus-width = <8>;
> + fsl,tuning-step = <2>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_enet1: enet1grp {
> + fsl,pins = <
> + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
> + MX7D_PAD_SD2_WP__ENET1_MDC 0x3
> + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
> + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
> + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
> + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
> + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
> + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
> + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
> + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
> + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
> + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
> + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
> + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
> + >;
> + };
> +
> + pinctrl_enet2: enet2grp {
> + fsl,pins = <
> + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
> + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
> + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
> + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
> + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
> + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
> + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
> + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
> + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
> + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
> + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
> + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
> + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
> + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
> + >;
> + };
> +
> + pinctrl_usbotg1: usbotg1grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG
> PWREN */
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX7D_PAD_SD3_CMD__SD3_CMD 0x59
> + MX7D_PAD_SD3_CLK__SD3_CLK 0x19
> + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
> + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
> + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
> + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
> + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
> + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
> + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
> + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
> + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
> + >;
> + };
> +};
> --
> 1.9.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
