From: David Rivshin <drivs...@allworx.com>
This series is based on the tip of the net tree.
The first patch fixes a bug that makes dual_emac mode break if
either slave uses the phy-handle property in the devicetree.
The second patch fixes some cosmetic problems with error messages,
and also makes the binding documentation more explicit.
The third patch cleans up the fixed-link case to work like
the now-fixed phy-handle case.
I have tested on the following hardware configurations:
- (EVMSK) dual emac, phy_id property in both slaves
- (BeagleBoneBlack) single emac, phy_id property
- (custom) single emac, fixed-link subnode
Note that I don't have a board which would uses a phy-handle property,
though I have used hacked devicetrees to exercise the code paths.
Testing by anyone who has real hardware using phy-handle or dual_emac
with fixed-link would be appreciated.
David Rivshin (3):
drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac
config
drivers: net: cpsw: fix error messages when using phy-handle DT
property
drivers: net: cpsw: use of_phy_connect() in fixed-link case
Documentation/devicetree/bindings/net/cpsw.txt | 4 +--
drivers/net/ethernet/ti/cpsw.c | 40 +++++++++++++-------------
drivers/net/ethernet/ti/cpsw.h | 1 +
3 files changed, 23 insertions(+), 22 deletions(-)
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
