Thanks Dan,

Well, I just got off the phone with technical support at Lucent/Agere.  We
confirmed that it is the Avaya/Lucent PCI adapter, so it should work.

I wonder if Gordon had to do anything to make his PCI bridge adapter work?
Or if he just plugged it in.

I'm going to keep looking around.  I wish I had ISA slots... :-)

Trev.

> -----Original Message-----
> From: Dan York [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, October 03, 2001 9:41 AM
> To: Trevor Ouellette
> Cc: E-Smith Developers Info Mailing List
> Subject: Re: [e-smith-devinfo] Wireless Options
>
>
> Trevor,
>
> > Thanks for the links.  Right now, I'm just trying to get the
> PCI Adapter to
> > be recognized (before working with the PCMCIA Card).
>
> Ahh, yes... the PCI Adapter.  I could not get it to work with my
> system and
> wound up returning it and getting the ISA adapter instead.
> Gordon did some
> subsequent research and found out that apparently the
> Avaya/Lucent PCI adapter
> will only work on systems that have *ONLY* PCI slots.  If there
> are any ISA
> slots in your system, the PCI adapter will not work.  (Or would not at the
> time Gordon did his research 6 or so months ago.)
>
> FYI, there was nothing I had to do to configure the ISA adapter.
> Just plugged
> it in and then plugged a PCMCIA card into it.  I was concerned that I was
> going to have to configure isapnp or some other Linux tool... but others
> have told me that it just basically works as a bridge to the
> PCMCIA card...
> I didn't have to do anything other than just plug it in.
>
> > If you are interested, I can write a howto for 4.1.2 and additional
> > instructions for SME5.
>
> That would be great. I had great intentions of writing up the work I did,
> but just have never found the time to do so.
>
> > If you can think of anything else (tips, tricks or notes),
> please send it my
> > way so that I can include them as well.
>
> I will. At some point *soon*, I want to get it working again at my
> house... I just haven't had the time to do so.
>
> Regards,
> Dan
>
> --
> Dan York, Director of Training        [EMAIL PROTECTED]
> Ph: +1-613-751-4401 Cell: +1-613-263-4312 Fax: +1-613-564-7739
> Mitel Network Corporation Network Server Solutions Group
> 150 Metcalfe St., Suite 1500, Ottawa,ON K2P 1P1 Canada
> http://www.e-smith.com/            http://www.mitel.com/
>
> --
> Please report bugs to [EMAIL PROTECTED]
> Please mail [EMAIL PROTECTED] (only) to discuss security issues
> Support for registered customers and partners to [EMAIL PROTECTED]
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
> Archives by mail and
> http://www.mail-archive.com/devinfo%40lists.e-smith.org
>
>


--
Please report bugs to [EMAIL PROTECTED]
Please mail [EMAIL PROTECTED] (only) to discuss security issues
Support for registered customers and partners to [EMAIL PROTECTED]
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org

Reply via email to