> Has anyone rebuilt the apcupsd rpm specifically for 4.1.2/SME5 auto > install yet?
I use it. I have rebuilt the rpm from source, using srpm for redhat 7.0, both on 4.1.2 and SME5. Here's what I did: - install apcupsd.rpm (I can send you the rpm, if you need) - edit /etc/apcupsd/apcupsd.conf to set DEVICE to serial port ups is connected to - /sbin/e-smith/db configuration set apcupsd service InitscriptOrder 20 status enabled - link /etc/rc.d/init.d/e-smith-service /etc/rc.d/rc7.d/S20apcupsd Then I copied (from /etc/apcupsd/cgi) multimon.cgi upsfstats.cgi upsimage.cgi and upsstats.cgi in the cgi-bin directory of an ibay and created a link to multimon.cgi. I did not build an rpm for e-smith because there are too many variables, so a complex (for me) manager panel is required. Let's see: UPSCABLE [ simple | smart | 940-00(20B,23A,24B,24C,24G,95A,95B,95C) | 940-15(24C) | ether ] UPSTYPE [ backups | sharebasic | netups | backupspro | smartvsups | newbackupspro | backupspropnp | smartups | matrixups | sharesmart ] DEVICE /dev/ttyS1 BATTERYLEVEL 5 MINUTES 5 Batterylevel and minutes should be mutually exclusive depending on the UPS type, that is SmartUPS calculates minutes using batterylevel and upsload. I'm not sure. Type ethernet reuqires extra parameter for master or slave. I can provide working configs. Ciao, Filippo -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
