----- Original Message ----- From: "Shad L. Lords" To: "Hugh Fox" Sent: Tuesday, April 16, 2002 9:12 PM Subject: Re: Arkeia and SME 5.1.2
> > If you want a tester, I would be happy (ecstatic) to help. > > I would appreciate that when I get back into developing mode. I've got a > lot going on at work right now. I will probably be another month or so > before I can get back into it. > > > What of the a5beta, I've installed that on a machine, and am testing using > > arkc commands -- very powerful, but very clunky .... > > My is based off of version 4 using the arkc command interface for > everything. > > > I'm assuming you are building a set of SME web-based panels to control > > backups / restores. > > My contrib will integrate it into the natural backup that SME already does. > Similar to the way other backup replacements work. The web panel will allow > you to look at logs, perform an immdediate restore (Exactly like backup now > from Darrell), perform 3 different restores (full, recommended, individual > file), and configure a few more options like eject tape. > > > It takes at least 15 mins to restore 1 file using my drive (although I > read > > somewhere that someone else was having slow resores also from that > > particular drive), restore speed is 1 - 2 Mb/min. > > > > At 22Gb /2 hours you are getting 183 Mb / min restore speed. You must have > a > > nice drive. > > > > I'm about to purchase a Sony AIT-1 4 tape autoloader (seems to be > supported > > by Arkeia). I will put AIT-1-XL tapes in it, to get 140 - 280 Gb on a set > of > > 4 tapes. > > I have an old Sony-300C (AIT-1) drive. I wouldn't go with the autoloader > unless you really have to. The freeware version of Arkeia doesn't support > autoloaders, only single drive installations. > > > Having Arkeia integrated into SME will really complete the system. > > That is what I thought as well. That is why I started the project. > > -Shad > -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
