On Tue, Feb 12, 2013 at 9:28 PM, Richard Hughes <hughsi...@gmail.com> wrote:
> On 11 February 2013 00:38, mark ellis <m...@rkellis.com> wrote: > > I've made a new patch that works just the same, but instead of copy and > > pasting i've just moved the block that works out energy-full and > > energy-full-design out of the coldplug if. > > So energy-full and energy-full-design actually change at runtime?! If > that's the case, I guess your patch makes sense. Could you grab me the > output the full output of the sysfs battery device before and after > the energy-full-design value changes please? Thanks. > They do change, but only for a split second (because the battery is broken, and lies about it's charge state every now and then) so I can't get a dump of before and after (well I can but they're the same). The only noticeable change is that according to upower energy-full goes up, from around 48Wh to ~700Wh, which makes the calculation for remaining energy way off. This patch just means that upower will reread what the battery says it's charge_full is so it can work out the correct % remaining. Before this patch I had to restart upower every so often (sometimes every few minutes, sometimes longer). I wish I could provide more info to help, but it's all because of the broken battery, and it's a nightmare trying to track it down! Hope this helps, Mark
_______________________________________________ devkit-devel mailing list devkit-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/devkit-devel
