*** From dhcp-server -- To unsubscribe, see the end of this message. ***
In order to have a route to the 10.0.1.0/24 network, the machine would
first need an address on that network.
At the present time, there is no provision to obtain an address for the
10.0.1.0/24 network except by sending request packets out that interface.
This would require either another dhcp server or a relay proxy on that
network.
On Mon, 3 May 1999, Tim Baur wrote:
> *** From dhcp-server -- To unsubscribe, see the end of this message. ***
>
> The best way to describe my question would be through an example;
>
> Multi router network
>
> Local LAN 10.0.9.0/24 (DHCP server on this LAN)
> Remote WAN 10.0.1.0/24
>
> Based off a standard config of;
>
> subnet 10.0.9.0 netmask 255.255.255.0 {
> range 10.0.9.200 10.0.9.250;
> option broadcast-address 10.0.9.255;
> option routers 10.0.9.254;
> }
>
> The above give's me an IP and network setup for the 10.0.9.0/24 network,
> with the default route of 10.0.9.254. What would I add (or modify) to this
> configuration in order to add a second route down to the Remote WAN (ie;
> route add 10.0.1.0 10.0.1.254)?
------------------------------------------------------------------------------
To unsubscribe from this list, please visit http://www.fugue.com/dhcp/lists
If you are without web access, or if you are having trouble with the web page,
please send mail to [EMAIL PROTECTED] Please try to use the web
page first - it will take a long time for your request to be processed by hand.
Archives for this mailing list are available at
http://www.webnology.com/list-archives/dhcp/dhcp-server
------------------------------------------------------------------------------
