Ok I have the pl27 version of dhcrelay working on my LRP system but it is showing some difficulties on starting. Network as follows eth0 202.59.255.0 mask 255.255.255.224 eth1 202.59.255.64 mask 255.255.255.254 dhcp server 202.59.255.1 when I read the docs I expect to start dhcrelay with dhcrelay -i eth1 202.59.255.1 this would allow it to relay from the server to eth1 but on startup it will not. If I start the dhcrelay up with dhcrelay 202.59.255.1 which attaches to all interfaces it relays. If after 1 relay I restart with the command dhcrelay -i eth1 202.59.255.1 it continues to relay. The no relay only seems to come from the first relay after a boot once the first relay has occurs it is no longer an issue. Have you seen this behavior before? Am I wrong in my thinking? Would you like more info? Hope this helps. Sincerely Michael Douglas LaSpina Managing Director I-con Internet Connection Co., Ltd. Khon Kaen, Thailand [EMAIL PROTECTED]
BEGIN:VCARD VERSION:2.1 N:LaSpina;Michael;Douglas FN:Michael Douglas LaSpina NICKNAME:Michael ORG:I-con Internet Connection Co., Ltd. TITLE:Managing Director TEL;WORK;VOICE:+66 (043) 337-040 TEL;WORK;VOICE:+66 (043) 337-041 TEL;HOME;VOICE:+66 (043) 347-561 TEL;CELL;VOICE:+66 (01) 954-1583 TEL;WORK;FAX:+66 (043) 337-043 ADR;WORK:;;90/83-84 Moo 4 Sri Chan Rd.;Naimuang;Muang Khon Kaen;40000;Thailand LABEL;WORK;ENCODING=QUOTED-PRINTABLE:90/83-84 Moo 4 Sri Chan Rd.=0D=0ANaimuang, Muang Khon Kaen 40000=0D=0AThaila= nd BDAY:19651103 EMAIL;PREF;INTERNET:[EMAIL PROTECTED] EMAIL;INTERNET:[EMAIL PROTECTED] EMAIL;INTERNET:[EMAIL PROTECTED] REV:19990411T022949Z END:VCARD
