*** From dhcp-server -- To unsubscribe, see the end of this message. *** Well, I managed to get the subnet that has thse SGI O2's upgraded to DHCPD 2.0 release, but it failed to solve my problem. It tried the always-reply-1048 to no avail. I am trying to boot SGI O2's diskless.. However, in the process of booting them, they bootp and then set a netaddr variable in the prom and boot. After they restart, they fail to boot. What is different according to what I am watching in the tcpdump is that the request for BOOTP response is coming from the ip address stored in boot rom. The problem is that the request seems to be ignored by the server. I have resorted to puting a 0.0.0.0 in the nvram after it boots to trick it into BOOTPing and booting on the next reboot. I really should not have to do this. Anyone out there manage to get IRIX diskeless systems booted with ISC DHCPD. Any help would be greatly appreciated. -- John Stewart Pinnow [EMAIL PROTECTED] http://www.cs.uwm.edu/~jspinnow UWM Computational Technologies - Systems Programmer - [EMAIL PROTECTED] Technical support for College of Engineering & Applied Science Labstaff/helpdesk: 414.229.6393 Home: 414.761.1537 IEEE+CS: 414.229.2965 ----------------------------------------------------------------------- To unsubscribe from this list, visit http://www.isc.org/dhcp-lists.html or send mail to [EMAIL PROTECTED] with the subject line of 'unsubscribe'. -----------------------------------------------------------------------
