Dear Djibril,I actually don't think the issues are different. In our own case,
we renamed category options but when you get to the form designer, what is
showing up is the old name. Running maintenance did not help. Running data
integrity showed that the changes made to some of the category option
combinations did not take effect and we had to recreate all the ones that did
not take effect.However, it wasn't until we removed the data element that had
the category option combo (that wasn't changing) from the dataset, and then
added it back, did the changes take effect. Not sure why this is happening, but
give it a try and see what happens.
Warm Regards,
Ifeanyi
Read DrMaestro's Blog
www.ifeanyiokoye.com
On Tuesday, November 28, 2017, 4:57:03 PM GMT+1, Djibril Dione
<djib...@hisp.org> wrote:
Thanks Ifeanyi for the update.Our issue is a bit different here all is
populating well on Data entry and people are capturing data. just that the
category option combination names are not updated with the correct and we use
those name in a complex completeness report script.
Test step On Sierra Leon 2.27
- I have renamed the dataelementcategoryoption "Improve access to clean
water" to "IACW"
- then go to administration app > maintenance > select "Update category
option combinations" and click "perform maintenance".
- then I go to category option combination under maintenance (metadata) and
search for "IACW" and could not find it but when you search for "Improve access
to clean water" you get many that pop in. i.e: "AIDSRelief Consortium, Improve
access to clean water" which supposes to be renamed to "AIDSRelief Consortium,
IACW"
- I create a sqlView that search on the categoryoptioncombo Table and I got
the same result as the front end
so whenever you rename a categoryoption I believe that the category option
combination name should also reflect the new name once an Update category
option combinations is performed
On Tue, Nov 28, 2017 at 5:03 PM, Ifeanyi Okoye <ifeanyiok...@yahoo.com> wrote:
Just an update on this.
Everything I tried initially did not work. I then went to the dataset editor
window to remove the problematic data elements and once I filtered them, I
found that each one of them had in parenthesis at the end of the name of the
data element, the category option combo that was causing the issue. Once I
removed and put it back, the issue was resolved.
I hope this helps somebody.
Thank you.
Warm Regards,
Ifeanyi
Read DrMaestro's Blog
www.ifeanyiokoye.com
On Monday, November 27, 2017, 10:04:23 AM GMT+1, Ifeanyi Okoye
<ifeanyiok...@yahoo.com> wrote:
Hello Lars,This is similar to the issue I raised on this platform last week.
What I noticed is that some data elements will carry the old category option
combo even after it has been changed or updated. This affects the form designer
and section forms. In our own case, everything refused to update. I ran
maintenance severally with no effect whatsoever.
I am posting the thread below as only one person weighed in on this:
Thread:
Hello Laura,Thank you for your response.
We are currently running the 22nd Nov (dbf5f18) build of version 2.27 which we
upgraded to on Thursday, this past week but the issue is still persisting.
I have recreated the category option combination and applied it to the data
element but the same issue is still persisting. When I do a metadata export
from the API, the missing categories are not on the list. It is as though DHIS
does not even create them for whatever reason.
I don't know if anyone can provide some insight on what we could do to fix this
since upgrading did not help.
It's affecting our roll out plans.
Thank you once again.
Warm Regards,
Ifeanyi
Read DrMaestro's Blog
www.ifeanyiokoye.com
On Tuesday, November 21, 2017, 10:21:58 PM GMT+1, Laura E. Lincks
<laura.lincks@icap.columbia. edu> wrote:
You may want to upgrade to the latest build. We had a similar problem with 2.27
(on a build from August) and we just upgraded this very minute to the latest
build 37edfc2 (Nov 8, 2017) and the problem appears fixed.
Laura E. Lincks
Database Manager/Developer
ICAP - Columbia University
Mailman School of Public Health
60 Haven Ave, Floor B1
New York, NY 10032
Tel: 212 304 7132
On Mon, Nov 20, 2017 at 1:13 PM, Ifeanyi Okoye <ifeanyiok...@yahoo.com> wrote:
Hello All,We are encountering this issue with the form designer where either
the data element does not show up in the form designer i.e. after having been
assigned to a dataset, or some of the category options do not show up.
In this instance I have a data element disaggregated by testing modalities,
sex, and age (age categories <1,1-4,5-9,10-14,15-19,20-24,
25-29,30-34,35-39,40-44,45-49, 50+).
The way it is showing up, a number of the age bands are missing in the form
designer and it is not uniform. E.g. VCT has female 15-19, VCT is missing male
15-19.
I have run maintenance, generated resource tables, run analytics, removed the
options from the category combo and put them back again, but still not showing
up.
We use custom forms a lot and this is not the first time we are encountering
this, but then, not to this degree.
Can anybody please help with this?
We are running DHIS2 ver 2.27 Build revision: a8283e0 Build date: 2017-09-21
06:25
Thank you.
Warm Regards,
Ifeanyi
Read DrMaestro's Blog
www.ifeanyiokoye.com
On Sunday, November 26, 2017, 9:51:05 AM GMT+1, Lars Helge Øverland
<l...@dhis2.org> wrote:
For data entry module, you might have to clean your browser cache.
regards,
Lars
On 25 November 2017 at 08:52, Djibril Dione <djib...@hisp.org> wrote:
Hi Lars,I did perform Update category option combinations as decrypt on my
email but there was no change in the name.similarly, I renamed the category
option "Improve Access to Improve access to clean water" on Sierra Leon demo
2.27. but no change after performing maintenance.
On Fri, Nov 24, 2017 at 11:28 PM, Lars Helge Øverland <l...@dhis2.org> wrote:
Hi there,
try going to data administration app > maintenance > select "Update category
option combinations" and click "perform maintenance".
regards,
Lars
On 24 November 2017 at 15:01, Djibril Dione <djib...@hisp.org> wrote:
Dear DHIS2 community, We are setting up an aggregated system using Attribute
option as part of the disaggregation. Some of the category option names were
not correct and we have renamed them.
Now after updating the category option combination through data
administration/Maintenance, the old combination name is still appearing on the
category option combinations on the frontend and at the backend.
we have renamed some attribute option on Sierra Leon Demo 2.27 and still found
the same issue.
Is there anyone experiencing the same issue.
we are using version 2.27 build:5c148f4
--
Kind Regards
Djibril Dione
Database Specialist
Health Information Systems Program – SA
Cell: +27 71 711 5421
Skype: dione.djibril
Address: 66 Rigel Ave North, Waterkloof Ridge, Pretoria, 0181
Web: www.hisp.org
NPR Reg No: 2003/005786/08
This message and any attachments are subject to a disclaimer publishedat
http://www.hisp.org/policies.h tml#comms_disclaimer. Please read the disclaimer
before opening any attachment or taking any otheraction in terms of this
electronic transmission. If you cannot access thedisclaimer, kindly send an
email to disclai...@hisp.org and a copy will be provided to you. Byreplying to
this e-mail or opening any attachment you agree to be bound by theprovisions of
the disclaimer.
______________________________ _________________
Mailing list: https://launchpad.net/~dhis2-u sers
Post to : dhis2-us...@lists.launchpad.ne t
Unsubscribe : https://launchpad.net/~dhis2-u sers
More help : https://help.launchpad.net/Lis tHelp
--
Lars Helge Øverland
Lead developer, DHIS 2University of OsloSkype: larshelgeoverlandl...@dhis2.org
http://www.dhis2.org
--
Kind Regards
Djibril Dione
Database Specialist
Health Information Systems Program – SA
Cell: +27 71 711 5421
Skype: dione.djibril
Address: 66 Rigel Ave North, Waterkloof Ridge, Pretoria, 0181
Web: www.hisp.org
NPR Reg No: 2003/005786/08
This message and any attachments are subject to a disclaimer publishedat
http://www.hisp.org/policies.h tml#comms_disclaimer. Please read the disclaimer
before opening any attachment or taking any otheraction in terms of this
electronic transmission. If you cannot access thedisclaimer, kindly send an
email to disclai...@hisp.org and a copy will be provided to you. Byreplying to
this e-mail or opening any attachment you agree to be bound by theprovisions of
the disclaimer.
--
Lars Helge Øverland
Lead developer, DHIS 2University of OsloSkype: larshelgeoverlandl...@dhis2.org
http://www.dhis2.org
______________________________ _________________
Mailing list: https://launchpad.net/~dhis2- users
Post to : dhis2-users@lists.launchpad. net
Unsubscribe : https://launchpad.net/~dhis2- users
More help : https://help.launchpad.net/ ListHelp
--
Kind Regards
Djibril Dione
Database Specialist
Health Information Systems Program – SA
Cell: +27 71 711 5421
Skype: dione.djibril
Address: 66 Rigel Ave North, Waterkloof Ridge, Pretoria, 0181
Web: www.hisp.org
NPR Reg No: 2003/005786/08
This message and any attachments are subject to a disclaimer publishedat
http://www.hisp.org/policies. html#comms_disclaimer. Please read the disclaimer
before opening any attachment or taking any otheraction in terms of this
electronic transmission. If you cannot access thedisclaimer, kindly send an
email to disclai...@hisp.org and a copy will be provided to you. Byreplying to
this e-mail or opening any attachment you agree to be bound by theprovisions of
the disclaimer.
_______________________________________________
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help : https://help.launchpad.net/ListHelp
