Basically yes, but if you need a lot of precision you should evaluate a more CAD-style solution, though Dia is pretty decent once you lear to use it.
Open File->Page Setup And the first thing is to decide the paper size and for your application you probably want to select the horizontal layout as well. Then look at the scale factor which is the scale relationship between objects and the paper size. The smaller the scale the more objects fit on a screen, that is, when using the object templates[1], but in your case you need to figure out the grid scale versus the paper scale just like using a scale rule. [1] Some template objects seem to have a fixed relative size and grow automagically (e.g. the UML template) while others allow for you to scale them, so keep that in mind. Assuming you are using USLetter horizontal, then your page will be 21.6cm 27.9cm and the default margins will be 2.54cm on each side, which is 5.08 that is not visible on the grid. This means that the actual grid, starting at 0,0 should go from 0 to 22.82 on the horizontal and 0 to 16.52 on the vertical. This is for the first sheet and the rest is a continuum so you can actually print and then tape the sheets at the margins. Most printers will require 1" margin anyway so the default 2.54 margin is safe. Finally you can tweak the grid properties in File->Diagram Properties but the dynamic grid will work well for most applications. Best, -- Alejandro Imass On Mon, Jul 9, 2012 at 2:20 PM, Mike Cola <mjc...@hotmail.com> wrote: > I have been testing the Dia app for layout drawings such as floor plans and > was wondering if its possible to set and display dimensions of lines as well > as set a specified scale for the entire drawing? > > > > Thanks > > > > Mike > > > ________________________________ > > This e-mail message, including any attachments, is for the sole use of the > intended recipient(s) and may contain information that is confidential and > protected by law from unauthorized disclosure. Any unauthorized review, use, > disclosure or distribution is prohibited. If you are not the intended > recipient, please contact the sender by reply e-mail and destroy all copies > of the original message. > > _______________________________________________ > dia-list mailing list > dia-list@gnome.org > https://mail.gnome.org/mailman/listinfo/dia-list > FAQ at http://live.gnome.org/Dia/Faq > Main page at http://live.gnome.org/Dia > > _______________________________________________ dia-list mailing list dia-list@gnome.org https://mail.gnome.org/mailman/listinfo/dia-list FAQ at http://live.gnome.org/Dia/Faq Main page at http://live.gnome.org/Dia
