Dear listeners, I would like to consult on a issue of flame lifting.
I have installed 8 floating digesters and all are working well and the gas production is also very good.
The only issue I have right now is the flame lifting issue, specially with the latest installation. The latest installation, in a village in Bali, has a capacity of 1000 liter gas tank and the distance between the structure and the stove is about 20 meters. I used a combination of a plastic tube and pvc of equal size and that is 1/2".
I can not get the flame burned immediately above the surface of the burner but it is lifting. I have tried the same stove at home in which the distance between the biogas and the stove is about 8 meters and the flame is stable and not lifting.
Can anybody suggest solutions to this issue? thanks Rgds, Deepak _______________________________________________ Digestion mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/digestion_lists.bioenergylists.org for more information about digestion, see Beginner's Guide to Biogas http://www.adelaide.edu.au/biogas/ and the Biogas Wiki http://biogas.wikispaces.com/
