Mel, Is it possible that you start on a different audio frequency and that the passband on the rig behaves differentially? Try different frequency settings on the same band example 75o hz, 1000hz 1500 hz and notice the difference in drive levels needed for the same power out.
Ron W4LDE Mel wrote: >Hello everyone, > >I know nothing about computers and soundcards so can anyone explain >why I have this problem? I use Quickmix to hold the correct PSK >settings for each band I operate, and this works mostly OK, with one >exception, and that is 20 metres. > >I have to disconnect the rig after every operating session because my >shack is in the garden. Each time I re-connect the rig, I load the 20 >metre setting, and every time I have to re-adjust it. Quickmix sets >it in the same place then I find the ALC is showing so I make the >correct adjustment and re-load the new setting into Quickmix and then >everything is OK > >The following day I have to go through the same procedure again, but >only on 20 metres. Why should the VOL setting on the PC be OK for 20 >metres one day, but not the next.? Sometimes the variation in the >setting on the VOL scale is quite noticeable.I use an ACC1 cable. Its >not a big problem, its just irritating. > >Mel G0GQK > > > > > > >Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org > >Other areas of interest: > >The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/ >DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion) > > >Yahoo! Groups Links > > > > > > > > Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org Other areas of interest: The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/ DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/digitalradio/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
