--- In [email protected], "Ross" <[EMAIL PROTECTED]> wrote: > > I would appreciate, some advice as to how to set up my Orion for transmitting, I know my sound card is working and I can control > the tx from Mixw2, Multipsk, Writelog, etc. > So what do I put into the config file, ? > Cat control is on com1, > Ptt is on com3, > What do I put into the GPS port and theLDG port? > Regards > Ross > ZL1WN > ps receiving works well, with SM7 and EA,s coming through on 14109.500 >
Hi Ross, What type of control interface are you using between the computer RS232 and the PTT? If you are using something like a Rigblaster, then try this: Select IC706. Select USE RTS for PTT. (if your interface uses DTR for PTT, then select it instead) CAT com1 (doesn't matter) PTT com3 GPS com4 (doesn't matter) LDG com4 (doesn't matter) 73 Bonnie KQ6XA Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org Other areas of interest: The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/ DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/digitalradio/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/digitalradio/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
