Wonderful...how about a test of the mode on PathSim?

Walt/K5YFW

-----Original Message-----
From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Andrew 
O'Brien
Sent: Sunday, October 22, 2006 3:27 PM
To: [email protected]
Cc: [email protected]
Subject: [digitalradio] QRP/Low SNR DV test results



Tony KT2Q and I  just completed some 40M tests of a beta version of DRMDV that 
we agreed to test for Cesco HB9TLK.  Cesco forewarned us that it is a rough 
beta with a codec that has poor audio.

We were in QSO for about 30 minutes on 40M at around 1530 local time 1930 UTC.  
We were able to use the DRMDV 99% of the time without dropping audio.  We are 
335 air miles apart, I was using a 20M dipole simply tuned up for 40m!  I am 
not sure what Tony was using on 40M.  Tony dropped power progressively (using a 
QRP watt meter) down to 1 watt.  I was able to decode his digital signal 100% 
at 1 watt, a SNR of 5.5  (S1 on my Kenwood Ts440 meter).  Tony then went to 500 
milliwatts and I lost him altogether, SNR went from 5.5 to zero suddenly.  

I then did the same , adjusted my gain gradually down to 5 watts out on my  
power meter, it may not be very accurate.  Tony was able to copy me 100% at 5 
watts with an SNR between 5-6.  I did not attempt to go below 5 watts.  

Of course, the audio is not great with this codec but it does pass the low SNR 
test.  
Andy.
K3UK


 


Need a Digital mode QSO? Connect to  Telnet://cluster.dynalias.org

Other areas of interest:

The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/
DigiPol: http://groups.yahoo.com/group/Digipol  (band plan policy discussion)

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/digitalradio/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/digitalradio/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[EMAIL PROTECTED] 
    mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

Reply via email to