Yes, that's what I am going to do...and use VOX to start with until I build an optoisolator PTT circuit.
Here is a strange unexpected occurrance...I connected the audio output from the IC-746PRO's ACC1 plug to the soundcard line input and when not running Fldigi, I can hear the received audio through the speakers connected to the sound card. If I tunr on monitoring, I can hear my transmit signal. However, when I run Fldigi, I can't hear the Fldigi transmit tones as I do if the receiver is not connected to the line input. Hi Hi. 73 all... Walt/K5YFW -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of scottbomb Sent: Tuesday, February 27, 2007 9:05 AM To: [email protected] Subject: [digitalradio] Re: Audio Output This is what I do with my computer/IC-706 setup. Most likely, the sound output from the computer is stereo (I've never seen a mono out on a comp.) but you can use a mono plug and it will send 1 channel to the radio. A 1:1 isolation transformer between the 2 is recommended. I run the audio from the radio to the comp. through the mic. input. n0xmz --- In [email protected], Walt DuBose <[EMAIL PROTECTED]> wrote: > > One of my sound cards has only one output jack and a mic and line input jacks. > > I would like to use a simple splitter cable on the output, one to the speakers > and one to the AF output on the ACC1 plug of my IC-746. > > Will this likely cause a problem using Fldigi or PSKMail? > > Thanks & 73, > > Walt/K5YFW > Announce your digital presence via our DX Cluster telnet://cluster.dynalias.org Our other groups: http://groups.yahoo.com/group/dxlist/ http://groups.yahoo.com/group/themixwgroup http://groups.yahoo.com/group/contesting http://groups.yahoo.com/group/wnyar http://groups.yahoo.com/group/Omnibus97 Yahoo! Groups Links
