Well done John , I hope to work you with that Digikeyer and TS2000.
ANdy K3Uk
>
> Andy:
> The part I failed to understand was creating the ports. I just
> loaded the "template". I went back and created a seperate port for
> Control, FSK, CW, and PTT. Now Commander is working.
>
> I am sure there are some other areas that I will have to work on as
> well. The first time you try to do this all is not as obvious as it
> seems later.
>
> Thank you,
>
> John W0TMM
>
> --- In [email protected], "Andrew O'Brien"
> <andrewobrie@> wrote:
> >
> > --- In [email protected], "w0tmm" <w0tmm@> wrote:
> > Let me start from the beginning of the usual process, just so I
> > understand.
> >
> > Did you install the device router?
> > If so, did you create a virtual serial port for rig control?
> > If so, does that virtual serial port correspond with the one you set
> > up in Commander ?
> > Did you set the baud rate for the TS-2000 and Commander (9600 baud for
> > both).
> > Does Commander read the rig's frequency?
> >
> > I'll quit there and save the other questiosn for later..
> >
> > Andy K3UK
>
