I cranked the signalink usb to full power and it still wasn't strong enough. However the software has a digital gain in it. When I increased that it seemed to work fine. I didn't have time to test it with an actual signal, but will test it tonight.
Thanks. K6WRJ ----- Original Message ----- From: John Becker To: [email protected] Sent: Wednesday, April 11, 2007 6:19 AM Subject: Re: [digitalradio] WSJT issue, receive waterfall issue. James I'm using the same Signalink model Sl-1. Other then the USB connection they are the same. I have found that you must really give it a lot of RX audio. Then it works just fine. So crank it up and let me know how its working. John, W0JAB At 12:50 AM 4/11/2007, you wrote: >Tonight I got WSJT working for the first time and I found my first problem. I am using a Signalink USB connected to a ft-897 the waterfall is almost all blue. No static or other signal indications. I switched to 14.070, strong PSK signals showed up excellent on my PSK waterfall but barely showed up in WSJT. > >I do have the correct interface selected, I proved this by turning up the volume on the signalink and I could see an increase in DB but very little actual data. > >Any help is appreciated thanks in advance. >
