That's fine Danny but I'll say it once again just for you - I have no waterfall when I operate RTTY or software or computer or can click on anything. But I can do the math from the dial frequence to spot a mark dial frequency if that would make you happy. Maybe you can click on that.
At 06:29 PM 5/28/2007, you wrote: >I guess it comes down to the majority of us not working Hell, or M63. There >may be a lot that do, but I hardly if ever see a spot on those modes. As to >RTTY, I have 227 countries, and also 135 on PSK. The majority of spots on >RTTY are almost spot on, and I am guessing that what I see on the spot page >are actually taking into consideration the offset, where the Mark freq >shows. For instance right now, the only RTTY I see for awhile on the spot >page is 14,0864 for EC1AAC. When I click on that one, the trace marker on >the waterfall shows up at 14.0864 and the rig shows 14.08522 on the tune >window. I seldom have to move the tracer more than 100 cy, and that really >isnt necessary , in order to copy the signal. Also, if the AFC is activated >on the software, it hops right on top of the incoming signal. If you dont >have a waterfall, it would be impossible to spot the waterfall freq, now >would it no?. HI. > >One of these days, you will probably have CAT control. It took me about 34 >years before I did. Its been an excellent addition to my operation, but >prior rigs simply didnt have the capability. I started doing that at the >same time I started using a computer to send/receive RTTY - and only after >my TS430s took a dive from a lightning strike.
