Thanks to Dave G3VFP for the assist. Issue was with the mic setting in FT817 and the audio setting config on the PC/SL.
--- In digitalradio@yahoogroups.com, "wd4elg_base" <[EMAIL PROTECTED]> wrote: > > New owner of FT-817, experienced user of SignaLink USB and MixW. > > The SignaLink unit works perfectly, with my TS480 and MixW. Now I > want to use the FT-817. I am using the same cable (I presume that > since they are both 6-pin data cables, it should work fine). > > I am able to receive perfectly using MixW. I can't get the transmit > to work on the rig. I tried USB (AFSK like on the Kenwood) and DIG > modes with no luck. I varied the level of TX on the SignaLink with > no results. The MIC level on the FT-817 was varied as well. Still > no activation of the TX. > > * I have checked to make sure the SignaLink soundcard is > selected for audio output. > * The FT817 itself appears is working fine, I made 2 contacts > with EU last night on this antenna on CW. > > Any ideas appreciated. Thanks > > Mark, WD4ELG >
