Similar hardware here, set up in a different fashion. Onboard AC97 for mic input and TX output
Creative Audigy 2 for RX input and speaker out. Needs a trick to mute the input RX audio using the effects menu. You must mute the line input to the soundcard mix, or you will get the received, undecoded carriers noise mixed with the decoded output. That can be programmed as a "special effect" on the Audigy menu. I got the idea from the Spectrum Lab docs. 73, Jose, CO2JA --- Kevin O'Rorke wrote: > Hello All > I have installed fdmdv_6_jan . > All seemed to set up ok. > I have 2 sound cards. Realtek ac97 on board which i have set for RX in > and TX out, and USB Creative SB Extigy forVoice in and Voice out. > If I put the mute right down I get random bits of voice sounding "gunk", > so that side of things seem to be ok, and also the W/F is active. > On transmit there is being transmitted. a fairly high pitched garbage, > all the time. and although the CRO display indicates plenty of audio > from the microphone, the sound of the garbage does not vary nor does its > amplitude. > I have no one locally to experiment with. > Is what I am seeing and hearing normal? > > Kevin > VK5OA __________________________________________ Participe en Universidad 2008. 11 al 15 de febrero del 2008. Palacio de las Convenciones, Ciudad de la Habana, Cuba http://www.universidad2008.cu
