Hey, Steiner I have it installed. Before I did anything else, I modified the Pilot CQ to add my callsign and Grid Locator (EM79). When I selected the Pilot CQ (I'm using the "SEND" button now) I found four tone "beeps" transmissions being transmitted. When I pressed the "SEND" button, I transmitted the CQ sequence but with no PILOT Tones.
My Pilot CQ is: <Pilot>CQ CQ CQ DE W6IDS W6IDS EM79 <Pilot>CQ CQ ......etc etc etc Hmmm....I'm not totally clear on what's happening or if I accidentally did something wrong in modifying the Pilot CQ. Can you clarify your sentence abut the Pilot Tone below also? Howard W6IDS Richmond, IN ----- Original Message ----- From: "Steinar Aanesland" <saa...@broadpark.no> To: <digitalradio@yahoogroups.com> Sent: Monday, January 12, 2009 5:08 PM Subject: [digitalradio] MFTTY 3.0.143 is out > MFTT 3.0.143 > # Pilot Tone will be inserted automatically after a transmission pause > of equivalent 4 words time > # Thin grey line added to spectrum display, indicating the center > frequency of Rx-Band-Pass-Filter > # Double click on "Rx ..... Hz" will copy the Tx freq. > # Double click on "Tx ..... Hz" will copy the Rx freq. > # Tool Tip Text added to UI elements <SNIP> <SNIP>
