When using RIGCAT with an Icom 746P, should we be using a xml for for that rig ?
--- In digitalradio@yahoogroups.com, "Andrew O'Brien" <k3uka...@...> wrote: > > Thanks Skip, will try that. > > Since the Microham device router test button works, the Digikeyer is > working correctly. We just need to get FL-DIGI set correctly. > > --- In digitalradio@yahoogroups.com, "kh6ty" <kh6ty@> wrote: > > > > Andy, try Rig Cat instead of Ham Lib. That should trigger the PTT > with a CAT > > command. There seem to be quite a few reported problems trying to > use > > Microham Digikeyer, but I do not have one, so it is hard to help > understand > > what is wrong. > > > > 73, Skip KH6TY > > > > > > > > ----- Original Message ----- > > From: "Andrew O'Brien" <k3ukandy@> > > To: <digitalradio@yahoogroups.com> > > Sent: Sunday, February 15, 2009 4:11 PM > > Subject: [digitalradio] No PTT, FLDIGI with ICom 746P and Digikeyer > > > > > > I am trying to help a friend set-up FLDIGI on his new laptop using > his > > Microham Digikeyer. Using the device router for the digikeyer > (control > > port 5 and PTT port 6) the digikeyer PTT test button does toggle the > > PTT. However when using FL-Digi , frequency display corresponds > with > > the Icom 746 but the T/R button fails to place the Icom in to > transmit > > mode. Any ideas ? When configuring FL-DIGI, we did try to use > HAMLIB > > and PTT via CAT control, but that did not produce a PTT wither. > > > > Andy K3UK > > >