Thanks Rein. My settings are the same except that I do not have a narrow filter employed all the time. However, reducing my IF DSP settings to the narrowest setting on a TS2000 still causes fldigi to move towards a nearby unwanted signal and put it outside the range of a client/server that I may be in contact with. While typing this, with narrow filter and AFc off, I moved 125 Hz and stayed there (in PSK250 mode).
On Sat, Oct 24, 2009 at 9:04 AM, Rein Couperus <r...@couperus.com> wrote: > The settings are at http://pskmail.wikispaces.com/FAQ+Radio > > I have these on PI4TUE, DA5UWG and PA0R (of course all running linuxes), > and none of the systems has the problems you describe. > > .Attached a screenshot of PI4TUE during a pactor attack... > the pactor signal is S9, and the system remains on freq, which is 1500 Hz > for the ICOM 756... > > The second screen shot, taken at the same time at PA0R with the DSP of the K3 > open, shows it is actually a pactor 3 signal (pactor 3 is not alowed in > region 1. > max allowed bandwidth is 500 Hz), having a bandwidth of some 2 kHz... > The pactor signal is S9. Again here the cursor remains at exactly 1000 Hz. > > 73, > > Rein PA0R > > >> -----Ursprüngliche Nachricht----- >> Von: "Andy obrien" <k3uka...@gmail.com> >> Gesendet: 24.10.09 15:38:16 >> An: fldigi-alpha <fldigi-al...@lists.berlios.de> >> Betreff: Re: wandering ... screenshot . AV (MS) and AW (Puppy) > > >> The screenshot at http://www.obriensweb.com/fldigi.jpg shows both >> fldigi and Multipsk in PSK250 mode and set originally to 1000 Hz on >> the waterfall. Tuned to a position near a moderate strength SSB phone >> signal. The picture shows fldigi (while jpskmail is open) dragged >> away from 1000 hz by the presence of the phone signal, down to 840 >> Hz. Multipsk remains at 1000 (998). This is using AV under Windows, I >> will move on to AW now. >> >> Under AW , I can replicate the same phenomena under the Puppy with >> fldigi 3.13AV and the PSKMAIL SERVER (I do not use client under linux) >> . With a strong RTTY signal nearby and fldigi AV running alone, >> fldigi stays fairly stead as I tune towards the RTTY station, the >> waterfall place holds within 20Hz. With the pskmail server active , >> it wanders all over the place. >> >> Under Windows the wandering continues in fldigi even if javapskmail is >> closed, it stops wandering if I close both and then boot up fldigi >> alone. Under Linux, the wandering stops if I close the server and >> leave fldigi running. >> >> Again, I remain open to the possibility that this is due to my settings. >> >> Andy K3UK >> _______________________________________________ >> fldigi-alpha mailing list >> fldigi-al...@lists.berlios.de >> https://lists.berlios.de/mailman/listinfo/fldigi-alpha >> > > -- > http://pa0r.blogspirit.com > > > > ------------------------------------ > > Announce your digital presence via our Interactive Sked Pages at > http://www.obriensweb.com/sked > > Recommended digital mode software: Winwarbler, FLDIGI, DM780, or Multipsk > Logging Software: DXKeeper or Ham Radio Deluxe. > > > > Yahoo! Groups Links > > > >