I do ! :)
On Fri, 2005-01-14 at 17:24 +0000, Torgeir Veimo wrote:
> Is the radeon driver maintained? Are there any users with 2.6.* kernels
> which are using this driver with success?
>
> email message attachment, "Forwarded message - [directfb-users]
> problem with radeon driver"
> On Fri, 2005-01-14 at 17:24 +0000, Torgeir Veimo wrote:
> > Even though I've patched the radeonfb driver to set accelerator id,
> > DirectFB doesn't seem to pick it up. This is using vdr & softdevice
> > output plugin;
> >
> > [EMAIL PROTECTED] VDR]# ./rundfb
> > [softdevice] processing args
> > [softdevice] argv [0] = softdevice
> > [softdevice] argv [1] = -vo
> > [setup-softdevice] alsa device set to: hw:0,2
> > [setup-softdevice] A/V Offset set to (-8)
> > [setup-softdevice] cropping mode set to 0 (none)
> > [setup-softdevice] deinterlace method set to 1 lavc
> > [softdevice] picture mirroring set to 0 (off)
> > [setup-softdevice] pixel format set to (YUV2)
> > [setup-softdevice] startup aspect set to (16:9 wide)
> > [softdevice] initializing Plugin
> > [softdevice] Initializing Video Out
> > [softdevice] ffmpeg version(0.4.9-pre1) build(4736)
> > [dfb] init
> > (*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
> >
> > ---------------------- DirectFB v0.9.21 ---------------------
> > (c) 2000-2002 convergence integrated media GmbH
> > (c) 2002-2004 convergence GmbH
> > -----------------------------------------------------------
> >
> > (*) DirectFB/Core: Single Application Core. (2005-01-14 15:11)
> > (*) Direct/Memcpy: Using MMXEXT optimized memcpy()
> > (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 10190)...
> > (*) Direct/Thread: Running 'PS/2 Input' (INPUT, 10213)...
> > (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:802]
> > (*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
> > (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 10214)...
> > (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
> > (*) DirectFB/Genefx: MMX detected and enabled
> > (*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (convergence
> > integrated media GmbH)
> > (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
> > [dfb] RAM: 67108864 bytes
> > [dfb] Accellerated Functions: none
> > [dfb] Drawing Flags: none
> > [dfb] Surface Blitting Flags: none
> > [dfb] Supported video Modes are: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL
> > PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
> > [dfb] Enumeratig display Layers
> > Layer 0 FBDev Primary Layer Type: graphics
> > Caps: brightness contrast saturation surface
> > [dfb]: could not find suitable videolayer
> > (!!!) *** WARNING [Application exited without deinitialization of
> > DirectFB!] *** [core.c:630 in dfb_core_deinit_check()]
> >
> > [EMAIL PROTECTED] VDR]# fbset -i
> >
> > mode "1280x720-50"
> > # D: 61.801 MHz, H: 37.501 kHz, V: 50.001 Hz
> > geometry 1280 720 1280 720 32
> > timings 16181 218 110 20 5 40 5
> > accel true
> > rgba 8/16,8/8,8/0,0/0
> > endmode
> >
> > Frame buffer device information:
> > Name : ATI Radeon QD
> > Address : 0xd0000000
> > Size : 67108864
> > Type : PACKED PIXELS
> > Visual : DIRECTCOLOR
> > XPanStep : 8
> > YPanStep : 1
> > YWrapStep : 0
> > LineLength : 5120
> > MMIO Address: 0xd9000000
> > MMIO Size : 16384
> > Accelerator : Unknown (38)
> >
> > Ideas?
> >
--
Julien Moutte <[EMAIL PROTECTED]>
