Hi,
I would like to use df_xine / DirectFB Lirc Driver together with my X10
RC which uses lirc_atiusb.
When DirectFB Lirc Driver is initializing the device, it ties to open /
close the socket once. In order to use the device it does the same
procedure a second time.
The Lirc driver crashes after the second open device as you can see
below from the logs. Lirc works fine with other programs like mplayer
and xine.
Any help would be appreciated. And thanks for your support beforehand.
Best regards,
Markus
PS: I do not know if this is a lirc or a DirectFB issue, therefore I
will cross-post this issue to the lirc-list and the directfb-dev mailing
lists.
======================= /var/log/lircd ===============================
Jul 29 20:32:25 xccube lircd 0.7.1: lircd(atiusb) ready
Jul 29 20:33:33 xccube lircd 0.7.1: accepted new client on /dev/lircd
Jul 29 20:33:33 xccube lircd 0.7.1: removed client
Jul 29 20:33:33 xccube lircd 0.7.1: accepted new client on /dev/lircd
Jul 29 20:33:33 xccube lircd 0.7.1: could not open /dev/lirc
Jul 29 20:33:33 xccube lircd 0.7.1: default_init(): Input/output error
Jul 29 20:33:33 xccube lircd 0.7.1: caught signal
======================== /var/log/messages =============================
Jul 29 20:31:07 xccube kernel: lirc_atiusb: USB remote driver for LIRC v0.4
Jul 29 20:31:07 xccube kernel: lirc_atiusb: Paul Miller
<[EMAIL PROTECTED]>
Jul 29 20:31:07 xccube kernel: lirc_atiusb: debug mode enabled: $Id:
lirc_atiusb.c,v 1.49 2005/03/12 11:32:14 lirc Exp $
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: usb_remote_probe:
dev:f76bc400, intf:f7143280, id:f99ee130)
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: scanning remote_list...
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: remote type = 0
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: adding remote to list
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: processing endpoint 0
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: acceptable inbound
endpoint (0x81) found (maxp=8 len=5)
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: adding ep=0x81 to list
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: processing endpoint 1
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: acceptable outbound
endpoint (0x2) found
Jul 29 20:31:07 xccube kernel: lirc_dev: lirc_register_plugin:
sample_rate: 0
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: X10 Wireless Technology
Inc USB Receiver on usb1:4
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: usb_remote_probe:
initializing outbound ep
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: send called (0x8004)
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: usb out called
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: send complete (0x8004)
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: send called (0x8007)
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: usb out called
Jul 29 20:31:07 xccube kernel: lirc_atiusb[4]: send complete (0x8007)
Jul 29 20:31:07 xccube kernel: usbcore: registered new driver lirc_atiusb
Jul 29 20:33:33 xccube kernel: lirc_atiusb[4]: set use inc
Jul 29 20:33:33 xccube kernel: lirc_atiusb[4]: set use dec
Jul 29 20:33:33 xccube kernel: lirc_atiusb[4]: set use inc
Jul 29 20:33:33 xccube kernel: lirc_atiusb[4]: open result = -EIO error
submitting urb
Jul 29 20:48:46 xccube -- MARK --
_______________________________________________
directfb-dev mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev
