---------- Forwarded message ----------
From: Carlos Ojea Castro <[EMAIL PROTECTED]>
Date: Thu, 20 Oct 2005 10:47:58 +0200
Subject: Re: saa7113h driver for PAL
To: Torgeir Veimo <[EMAIL PROTECTED]>
Finally I get the driver working with PAL.
I changed the config. registers in saa7113h.c as follows:
static DECODER_REG saa7113h_init_vals_ntsc[] =
{
{INCREM_DELAY, 0x08},
{INPUT_CNTRL1, 0xC2}, // Input 21, amplif. on, filter on, hist. off
{INPUT_CNTRL2, 0x23},
{INPUT_CNTRL3, 0x00},
{INPUT_CNTRL4, 0x00},
{HORSYNC_START, 0xe9},
{HORSYNC_STOP, 0x0d},
{SYNC_CNTRL, 0xB8}, // B8 for 50hz
{LUMIN_CNTRL, 0x00},
{LUMIN_BRIGHT, 0x80},
{LUMIN_CONTRAST, 0x47},
{CHROMA_SATURATION, 0x40},
{CHROMA_HUE_CNTRL, 0x00},
{CHROMA_CNTRL, 0x01},
{CHROMA_GAIN_CNTRL, 0x67},
{FORMAT_DELAY_CNTRL,0x00}, // for 50 hz
{OUTPUT_CNTRL1, 0x0C},
{OUTPUT_CNTRL2, 0xc8},
{OUTPUT_CNTRL3, 0x00},
{V_GATE1_START, 0x00},
{V_GATE1_STOP, 0x00},
{V_GATE1_MSB, 0x00},
{AC1, 0x02}, // needed for 50 hz
{LCR2, 0xFF},
{LCR3, 0xFF},
{LCR4, 0xFF},
{LCR5, 0xFF},
{LCR6, 0xFF},
{LCR7, 0xFF},
{LCR8, 0xFF},
{LCR9, 0xFF},
{LCR10, 0xFF},
{LCR11, 0xFF},
{LCR12, 0xFF},
{LCR13, 0xFF},
{LCR14, 0xFF},
{LCR15, 0xFF},
{LCR16, 0xFF},
{LCR17, 0xFF},
{LCR18, 0xFF},
{LCR19, 0xFF},
{LCR20, 0xFF},
{LCR21, 0xFF},
{LCR22, 0xFF},
{LCR23, 0xFF},
{LCR24, 0xFF},
{FC, 0x00},
{HOFF, 0x54},
{VOFF, 0x07}, // needed for 50 hz
{HVOFF, 0x83},
{SLICER_DATA, 0x00}
};
Thanks!
Carlos
_______________________________________________
directfb-dev mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev
