Ville Syrjälä wrote:
On Sat, Oct 22, 2005 at 11:32:32AM +0200, Attilio Fiandrotti wrote:
(!) DirectFB/Matrox: Can't find device in `/proc/bus/pci'!
For some reason the card is not detected. I need to see
/proc/bus/pci/devices and lspci -n.
Hi
here is the output from lspci, hope this may help you; if you need more
info just ask.
ciao
Attilio
debian:~# lspci -n
0000:00:00.0 0600: 1057:0002 (rev 20)
0000:00:0b.0 0601: 1014:000a (rev 03)
0000:00:0c.0 0200: 1022:2000 (rev 16)
0000:00:0d.0 ff00: 1014:0046
0000:00:10.0 0100: 1000:0003 (rev 13)
0000:00:17.0 0604: 1014:0022 (rev 01)
0000:01:01.0 0200: 10ec:8139 (rev 10)
0000:01:02.0 0300: 102b:051a (rev 02)
debian:~# lspci -vv
0000:00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 20)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
0000:00:0b.0 ISA bridge: IBM Fire Coral (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: I/O ports at 1000 [size=8]
0000:00:0c.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970
[PCnet32 LANCE] (rev 16)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 1020 [size=32]
Region 1: Memory at fdead000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at fdeb0000 [disabled] [size=64K]
0000:00:0d.0 ff00: IBM MPIC interrupt controller
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fdec0000 (32-bit, non-prefetchable) [size=256K]
0000:00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c825
(rev 13)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4250ns min, 16000ns max), Cache Line Size: 0x08
(32 bytes)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 1400 [size=256]
Region 1: Memory at fdeae000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at fdeaf000 (32-bit, non-prefetchable) [size=4K]
0000:00:17.0 PCI bridge: IBM IBM27-82351 (rev 01) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
I/O behind bridge: 007ff000-007fffff
Memory behind bridge: 3df00000-3effffff
Prefetchable memory behind bridge: 01000000-00ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Allied Telesyn International AT-2500TX/ACPI
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 7ff000 [size=256]
Region 1: Memory at fdfeb000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:02.0 VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG
[Mystique] (rev 02) (prog-if 00 [VGA])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fdfec000 (32-bit, non-prefetchable) [size=16K]
Region 1: Memory at fe000000 (32-bit, prefetchable) [size=8M]
Region 2: Memory at fe800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fdff0000 [disabled] [size=64K]
_______________________________________________
directfb-dev mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev
