My driver does some default configuration of the fb structures. Could this 
be a problem. I mean i initialize the
fb_var_screeninfo structure and the supported modes in the driver. Could it 
be possible that DFB too tries to configure it and then fails to do so thus 
crashing??

----- Original Message ----- 
From: "Denis Oliver Kropp" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Thursday, March 01, 2007 11:01 PM
Subject: Re: [directfb-dev] DirectFB on TI DaVinci


> [EMAIL PROTECTED] schrieb:
>> (!) DirectFB/FBDev: No supported modes found in /etc/fb.modes and current 
>> mode not supported!
>>  (!) DirectFB/FBDev: Current mode's pixelformat: rgba 5/11, 6/5, 5/0, 0/0 
>> (16bit)
>
> The format is fine. I could imagine that the frame buffer driver somehow
> rejects the configuration that itself returned. We could add an option
> to never probe or set the configuration of the frame buffer device, but
> just take the current as is if supported.
>
> -- 
> Best regards,
>   Denis Oliver Kropp
>
> .------------------------------------------.
> | DirectFB - Hardware accelerated graphics |
> | http://www.directfb.org/                 |
> "------------------------------------------"
>
>
> - This message has been scanned for viruses, spam and dangerous content by 
> www.CleanMailGateway.com, and is believed to be clean.
>
>
>
> eInfochips Business Disclaimer:
> This message may contain confidential, proprietary or legally Privileged 
> information. In case you are not the original intended Recipient of the 
> message, you must not, directly or indirectly, use, Disclose, distribute, 
> print, or copy any part of this message and you are requested to delete it 
> and inform the sender. Any views expressed in this message are those of 
> the individual sender unless otherwise stated. Nothing contained in this 
> message shall be construed as an offer or acceptance of any offer by 
> eInfochips Limited and/or eInfochips Inc("eInfochips") unless sent with 
> that express intent and with due authority of eInfochips. eInfochips has 
> taken enough precautions to prevent the spread of viruses. However the 
> company accepts no liability for any damage caused by any virus 
> transmitted by this email.
> 



eInfochips Business Disclaimer:
This message may contain confidential, proprietary or legally Privileged 
information. In case you are not the original intended Recipient of the 
message, you must not, directly or indirectly, use, Disclose, distribute, 
print, or copy any part of this message and you are requested to delete it and 
inform the sender. Any views expressed in this message are those of the 
individual sender unless otherwise stated. Nothing contained in this message 
shall be construed as an offer or acceptance of any offer by eInfochips Limited 
and/or eInfochips Inc("eInfochips") unless sent with that express intent and 
with due authority of eInfochips. eInfochips has taken enough precautions to 
prevent the spread of viruses. However the company accepts no liability for any 
damage caused by any virus transmitted by this email.

_______________________________________________
directfb-dev mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev

Reply via email to