Hello Matthias,
> The README talks about Matrox G400/200 for best results. How about the
> G450 (Using the second Port with the Video-Adapter Cable)
AFAIK DirectFB is fixed to /dev/fb0 (normally the "primary" port
of the G450), but besides that it runs fine on my G450.
There is no support for the TV-output at all at the moment,
neither in the kernel driver nor in the (binary only)
Matrox driver for XFree 4.x.y.
I don't think that the framebuffer driver will ever support
TV-output (at least not officially from Matrox). AFAIK they
don't provide specifications for that part of their chipsets,
because they must enable Macrovision "encryption" on every
TV-output. If you need TV-output from your Matrox card, IMHO
the easiest solution is to buy a VGA-to-RGB converter.
Please correct me, if I'm wrong.
> Bis denn
CU
Michael.
--
Info: To unsubscribe send a mail to [EMAIL PROTECTED] with
"unsubscribe directfb-users" as subject.
