Thank you for your replay. The onboard vga on Via P4M266 is exactly ProSavage 8. It is a little newer version of Savage then twister. Ben Lamb have written on the board that he managed to run savage4 driver on KM266. This chip hase onboard ProSavage8 too. The problem is that it hungs such as on Savage IX/MX. I do not have the P4M266 board yet. I will buy the board, which onboard vga will be supported by directfb. The problem would be simple if I chose AMD processor - NFORCE. The problem is that I cannot. So I am sticked to Celeron478. I see that the only board that could possibly work is that witch savage. Currently I have got SIS651 and I doubt that it will whenever run accelerated.
Should I keep hope that the drivers for Savage will be updated? Looking forward to hearing from you, regards, Maciej Jablonski Denis Oliver Kropp <[EMAIL PROTECTED]> wrote .. > I don't know what the ProSavage is like (S3 Twister?). > The framebuffer driver is a quite old port of the XFree > driver. I didn't hear of anyone yet, who used savagefb > on a ProSavage, but I might be wrong. > > Does the XFree driver work for your board? Someone should > either port it over again or apply the changes that have > been made in the meantime. > > -- > Best regards, > Denis Oliver Kropp > > .------------------------------------------. > | DirectFB - Hardware accelerated graphics | > | http://www.directfb.org/ | > "------------------------------------------" > > Convergence GmbH
