I tried running "df_video". But the video is not steady and it is swinging from top left to bottom right. But the picture is clear without sound. How to make this work good. Following are last few lines of the output of "dmesg" for u'r perception to help me.
i810fb: required vertical refresh, 48Hz, for 800x600 is out of range.
i810fb: required vertical refresh, 38Hz, for 1024x768 is out of range.
i810fb: required vertical refresh, 34Hz, for 1152x864 is out of range.
i810fb: required vertical refresh, 30Hz, for 1280x960 is out of range.
i810fb: required vertical refresh, 24Hz, for 1600x1200 is out of range.
i810fb: required video memory, 12MB, is out of range.
I am using Pixelview PlayTV Pro Tv Tuner card, bttv driver 0.7.72. I am using "fbtv" to watch TV. I can able watch TV with sound in Linux Console. And i added the line -> append="video=i810fb" in /etc/lilo.conf to invoke framebuffer driver during boot up.
Following are the output of fbset.
mode "640x480-61"
# D: 25.000 MHz, H: 31.888 kHz, V: 60.739 Hz
geometry 640 480 640 480 8
timings 40000 40 8 34 9 96 2
hsync high
vsync high
gsync true
rgba 8/0,8/0,8/0,0/0
end mode
I executed "fbset -xres 768 -yres 576 -depth 32" to run fbtv.With Regards,
S.Suriya Mohan.
___________________________________________________
Download the hottest & happening ringtones here!
OR SMS: Top tone to 7333
Click here now: http://sms.rediff.com/cgi-bin/ringtone/ringhome.pl
--
Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe directfb-users" as subject.
