On Thu, 11 Sep 2003 08:42:08 +0300 "Joni Kähärä" <[EMAIL PROTECTED]> wrote:
> For a g450 I did it as follows (I fished the schematic > from Matrox site but have since lost it): > > - take a male D15 & a female RCA > - connect D15 shield to RCA shield > - connect D15 pin 5 to RCA shield also > - connect pin D15 pin 1 to RCA center (signal) > - jump D15 pins 12 & 15 together (bridge them) It's on the page 52 of their g450 user guide. This is ok for composite video ... As the guide says, pin 1 is composite signal, pins 2 and 3 are Y and C for s-video signal. Now what's bugging me here is that all the directfb-mga-tv docs talk about rgb output, for which there should be _three_ pins with the appropriate signals. Also that user guide never mentions rgb output anywhere. So is this some official secret and it is possible to get rgb out of the matrox cards or is this just a misunderstanding somewhere? A mail back from april (http://www.directfb.org/mailinglists/directfb-dev/2003/04-2003/msg00047.ht ml) mentions the rgb cable and 'instructions from matrox.com' ... If g450 is really capable of rgb output, i'll go with directfb for my hcpc ... else i'll put some effort into soldering the dxr3 board to get rgb out :) -- Jure Pecar -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe directfb-users" as subject.
