On Tue, 16 Sep 2003 12:40:12 +0200 Denis Oliver Kropp wrote: > Quoting Ville Syrj�l�: > > On Tue, Sep 16, 2003 at 04:08:07AM +0000, Sarfraz Nawaz wrote: > > > I've applied the full memory patch that came with Directfb-0.19 and > > > things seem to work fine for the time being. fbset -i shows 32Meg. The > > > vsync patch however, fails. > > > > 2.4.22 shouldn't need the vsync patch. The only thing you need to do is > > make sure that FBIO_WAITFORVSYNC definition is in /usr/include/fb.h. > > Cool, I didn't notice that FBIO_WAITFORVSYNC is in 2.4.22 ;) > > Unfortunately, someone forgot to include the fb.h change in the patch. > > > > I still cannot get Directfb to compile with profiling support. I > am not > > > using the fusion patch. Everything compiles fine with > --enable-profiling. > > > But when I run anything like dfbinfo it seg faults. Is there any other > > > way to profile a Directfb program. > > > > I haven't tried profiling in a while. I know it used to work > sometime last > > spring. I don't remember if it required something special. > > I don't know of a profiling problem either. Are you linking statically? > > -- > Best regards, > Denis Oliver Kropp > > .------------------------------------------. > | DirectFB - Hardware accelerated graphics | > | http://www.directfb.org/ | > "------------------------------------------" > > Convergence GmbH > > > -- > Info: To unsubscribe send a mail to [EMAIL PROTECTED] with > "unsubscribe directfb-users" as subject. >
No I am not linking statically. This is the commandline that i use to configure and compile it. ./configure --prefix=/home/Install --enable-profiling --with-gfxdrivers=matrox Besides it doesn't find the libmpeg3.h either although I've exported CFLAGS=-I/home/Install/include/libmpeg3 which has libmpeg3.h Thanks for your time. Regards This message powered by EMUmail. http://EMUmail.com "w�N�����r��zǧu���[hyƫ�+ ������ "�����r��yثy�_n� �Ƭ���y�
