My first post here..:)
I am using Matrox G450 with todays CVS DirectFB. My gfx card is connected to tv with custom build vga-> rgb scart connector.
The vga cable is connected to the first head.
The problem is that when I lauch mplayer with -vo directfb the layer goes to 01 and nothing comes on screen.
I can avoid that by doing -vo directfb:layer=0.
But that same problem is with vdr/softdevice. I can see the OSD layer that is 0 but I can't see the video layer that is 1.
So why wont these both layers show on the screen?
Is it possible to force all to go to one layer instead of two?
This is the modeline I use:
mode "1024x576"
geometry 1024 576 1024 32752 32
timings 50314 132 68 37 6 48 6
laced true
hsync low
vsync low
accel true
Endmode
This is my /etc/directfbrc
matrox-tv-standard=pal
primary-layer=00
graphics-vt
no-vt-switch
mode=1024x576
depth=32
matrox-cable-type=scart-rgb
