I am trying to use a radeon with directfb for vdr. Isn't overlays
supported on radeons yet? The source seems to indicate it, yet vdr
cannot find any suitable layer. This is with current DirectFB CVS.
vdr reports;
[...]
[softdevice] ffmpeg version(0.4.9-pre1) build(4728)
[dfb] init
(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
---------------------- DirectFB v0.9.21 ---------------------
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2004 convergence GmbH
-----------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2004-11-08 13:55)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 4195)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 4199)...
(*) DirectFB/Input: IMPS/2 Mouse 0.9 (convergence integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 4200)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 4201)...
(*) DirectFB/Input: Logitech USB Receiver (2) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 4202)...
(*) DirectFB/Input: Budget-CI dvb ir receiver saa714Linux (3) 0.1
(convergence integrated media GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 4203)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (convergence
integrated media GmbH)
(!) Direct/Modules: Unable to dlopen
`/usr/local/lib/directfb-0.9.21/wm/libdirectfbwm_unique.so'!
--> libuniquewm-0.9.so.21: cannot open shared object file: No such
file or directory
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 134217728 bytes
[dfb] Accellerated Functions: none
[dfb] Drawing Flags: none
[dfb] Surface Blitting Flags: none
[dfb] Supported video Modes are: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL
PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL
PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL
PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL
PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL
PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[dfb] Enumeratig display Layers
Layer 0 FBDev Primary Layer Type: graphics
Caps: brightness contrast saturation surface
could not find suitable videolayer
(!!!) *** WARNING [Application exited without deinitialization of
DirectFB!] *** [core.c:630 in dfb_core_deinit_check()]
[VDR]# fbset -i
mode "1280x720-50"
# D: 61.801 MHz, H: 37.501 kHz, V: 50.001 Hz
geometry 1280 720 1280 720 32
timings 16181 218 110 20 5 40 5
accel true
rgba 8/16,8/8,8/0,0/0
endmode
Frame buffer device information:
Name : ATI Radeon QM
Address : 0xc0000000
Size : 134217728
Type : PACKED PIXELS
Visual : DIRECTCOLOR
XPanStep : 8
YPanStep : 1
YWrapStep : 0
LineLength : 5120
MMIO Address: 0xd2000000
MMIO Size : 16384
Accelerator : No
--
Torgeir Veimo <[EMAIL PROTECTED]>
