On Samstag, 5. November 2005 09:38, Stefan Lucke wrote: > On Freitag, 4. November 2005 22:31, Stefan Lucke wrote:
> > > > Normally I start dfb mode within an X session. When dfb mode was > > started in YUV2 mode I had a big black sticky rectangle in the upper > > left corner (about 720x576 ? thats a guess). Leaving dfb mode resulted in > > color keyed OSD with xv out did not work. > > Starting and ending dfb in I420 mode recovered that. > > Starting dfb in YUV2 stretchblit brought the black box again :-((( . > > I tried several versions of softdevice and directfb without any change. > > The black box survived even reboot and soft-poweroff (power disconnect > > was not tested). > > > > Now my black box has gone and I do not know why. > > Only a small idea. The initial surface size at dfb startup is 720x576. > > I changed that once to 820x576, started in dfb YUV2-stretchblit mode > > and had a very bad behaviour within softdevice. > > A few frames video with sound followed by poll timeouts and codec > > reinitialisation (but no black box). > > Since the following vdr restart very thing is fine and smooth again. > > Aiee, switched back to DirectFB cvs version from 2005-10-31, > and the big black rect in upper left corner is back ;-(( , and color keyed > OSD in xv is inoperable. > For some reason I think it is caused by the BES. Even disabling all calls to the BES video layer, this black square ton top. -- Stefan Lucke _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
