hi,
I don't know any place else where I could ask for help, so here
is my
problem.
I would like to run a TFT screen with 2.5" at my VGA out,
inbetween that
is a vga to RGB converter.
http://www.tkk.fi/Misc/Electronics/circuits/vga2tv/vga2palntsc.html
The VGA out has to send an interlaced signal to the converter!
A college tested it in windows it's working fine with following
settings
in powerstrip:
Resolution - 768 x 576
Horizontal refresh rate - 16
Verticalal refresh rate - 25
Horizontal front porch - 16
Vertical front porch - 5
Horizontal sync with - 65
Verticalal sync with - 5
Horizontal back porch - 96
Vertical back porch - 40
Pixel Clock - 14.774
Interlace active
I can't get it running in linux, I don't know the line for grub
and I
haven't found any information if it is possible at all to run
the FB
interlaced with my VGA card and these specs.
I am running debian with the following:
lspci tells me
0000:00:02.0 VGA compatible controller: Intel Corporation
82852/855GM
Integrated Graphics Device (rev 02)
uname -a - 2.6.14.5 (compiled from a vanilla kernel)
and DirectFB - 0.9.22
Any suggestion or help is greatly appreciated, if more
information
required just reply. Or just to point me into the right
direction :-|
Best regards,
Emil Krüper
--
Emil Krüper
Solcon Systemtechnik GmbH
Niels-Bohr-Ring 3-5
23568 Lübeck
Tel.: 0451-40948-19
Fax: 0451-40948-88
[EMAIL PROTECTED]
http://www.solcon-systemtechnik.de
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
