Hello all
I am not able to capture mouse events .Is there any way I can debug this
problem or what can be the possible reason.I am using a PS/2 mouse and
so I think there is no need of configuring the directfbrc file.
Awaiting response.
The log for Directfb start up:--
---------------------- DirectFB v0.9.24 ---------------------
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2004 convergence GmbH
-----------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2006-04-12 20:04)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 8877)...
(*) Direct/Thread: Running 'Linux Input' (INPUT, 8878)...
(!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:797]
(*) DirectFB/Input: ImPS/2 Logitech Wheel Mouse (1) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 8879)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (2) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 8880)...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 8881)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (convergence
integrated media GmbH)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
(*) Direct/Interface: Loaded 'GIF' implementation of
'IDirectFBImageProvider'.
(*) Direct/Interface: Using 'PNG' implementation of
'IDirectFBImageProvider'.
(!) DirectFB/FBDev: Panning display failed!
--> Invalid argument
(!!!) *** WARNING [letting unprivileged
IDirectFBDisplayLayer::GetSurface() call pass until cooperative level
handling is finished] *** [idirectfbdisplaylayer.c:170 in
IDirectFBDisplayLayer_GetSurface()]
(!) DirectFB/FBDev: Panning display failed!
--> Invalid argument
oqt_read_headers: ignoring root 'ftyp' atom.
oqt_delete_video_map (0)
(*) Direct/Interface: Loaded 'OpenQuicktime' implementation of
'IDirectFBVideoProvider'.
oqt_read_headers: ignoring root 'ftyp' atom.
yuv supported: 1
rfb supported: 0
THE dmesg output is:---
Linux version 2.6.5-1.358smp ([EMAIL PROTECTED]) (gcc
version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Sat May 8
09:25:36 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff7b00 (usable)
BIOS-e820: 000000003fff7b00 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
1023MB LOWMEM available.
ACPI: S3 and PAE do not like each other for now, S3 disabled.
found SMP MP-table at 000f9bf0
On node 0 totalpages: 262135
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 258039 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 COMPAQ ) @
0x000ea810
ACPI: RSDT (v001 COMPAQ CPQ0054 0x20040224 0x00000000) @ 0x3fff7b40
ACPI: FADT (v001 COMPAQ PLACER 0x00000001 0x00000000) @ 0x3fff7bf8
ACPI: SSDT (v001 COMPAQ PROJECT 0x00000001 MSFT 0x0100000e) @
0x3fff894d
ACPI: SSDT (v001 COMPAQ CORE_PNP 0x00000001 MSFT 0x0100000e) @
0x3fff8ee7
ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000e) @
0x3fff9433
ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000e) @
0x3fff95ce
ACPI: SSDT (v001 COMPAQ LGCYLITE 0x00000001 MSFT 0x0100000e) @
0x3fff98d6
ACPI: SSDT (v001 COMPAQ UART2 0x00000001 MSFT 0x0100000e) @
0x3fff9e15
ACPI: SSDT (v001 COMPAQ FLOPPY 0x00000001 MSFT 0x0100000e) @
0x3fff9f7c
ACPI: MADT (v001 COMPAQ PLACER 0x00000001 0x00000000) @ 0x3fff7c6c
ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000e) @
0x3fffba41
ACPI: ASF! (v016 COMPAQ PLACER 0x00000001 0x00000000) @ 0x3fff7cf0
ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000e) @
0x3fffa538
ACPI: SSDT (v001 COMPAQ UR2_PRSS 0x00000001 MSFT 0x0100000e) @
0x3fffa95c
ACPI: SSDT (v001 COMPAQ FPY_PRSS 0x00000001 MSFT 0x0100000e) @
0x3fffaac9
ACPI: SSDT (v001 COMPAQ S1 0x00000001 MSFT 0x0100000e) @
0x3fffabe2
ACPI: SSDT (v001 COMPAQ L08 0x00000001 MSFT 0x0100000e) @
0x3fffb7e4
ACPI: SSDT (v001 COMPAQ FINIS 0x00000001 MSFT 0x0100000e) @
0x3fffbbdc
ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @
0x00000000
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 1
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: ro root=LABEL=/ vga=788
mapped 4G/4G trampoline to fffeb000.
Initializing CPU#0
CPU 0 irqstacks, hard=023ae000 soft=0238e000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 3189.949 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 1034812k/1048540k available (1676k kernel code, 12968k reserved,
708k data, 180k init, 0k highmem)
Calibrating delay loop... 6324.22 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security
failed.
Failure registering capabilities with the kernel
selinux_register_security: Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000
00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: L3 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05
per-CPU timeslice cutoff: 1463.20 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Total of 1 processors activated (6324.22 BogoMIPS).
WARNING: No sibling found for CPU 0.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22,
1-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3189.0170 MHz.
..... host bus clock speed is 132.0882 MHz.
Brought up 1 CPUs
zapping low mappings.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.20 entry at 0xecdfa, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
IOAPIC[0]: Set PCI routing entry (1-18 -> 0xa9 -> IRQ 18 Mode:1
Active:1)
00:00:1f[A] -> 1-18 -> IRQ 169
IOAPIC[0]: Set PCI routing entry (1-17 -> 0xb1 -> IRQ 17 Mode:1
Active:1)
00:00:1f[B] -> 1-17 -> IRQ 177
IOAPIC[0]: Set PCI routing entry (1-23 -> 0xb9 -> IRQ 23 Mode:1
Active:1)
00:00:1f[C] -> 1-23 -> IRQ 185
IOAPIC[0]: Set PCI routing entry (1-19 -> 0xc1 -> IRQ 19 Mode:1
Active:1)
00:00:1f[D] -> 1-19 -> IRQ 193
IOAPIC[0]: Set PCI routing entry (1-16 -> 0xc9 -> IRQ 16 Mode:1
Active:1)
00:00:1d[A] -> 1-16 -> IRQ 201
IOAPIC[0]: Set PCI routing entry (1-21 -> 0xd1 -> IRQ 21 Mode:1
Active:1)
00:00:01[B] -> 1-21 -> IRQ 209
IOAPIC[0]: Set PCI routing entry (1-22 -> 0xd9 -> IRQ 22 Mode:1
Active:1)
00:05:0d[A] -> 1-22 -> IRQ 217
number of MP IRQ sources: 15.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 39
02 0FF 0F 0 0 0 0 0 1 1 31
03 0FF 0F 0 0 0 0 0 1 1 41
04 0FF 0F 0 0 0 0 0 1 1 49
05 0FF 0F 0 0 0 0 0 1 1 51
06 0FF 0F 0 0 0 0 0 1 1 59
07 0FF 0F 0 0 0 0 0 1 1 61
08 0FF 0F 0 0 0 0 0 1 1 69
09 0FF 0F 0 1 0 0 0 1 1 71
0a 0FF 0F 0 0 0 0 0 1 1 79
0b 0FF 0F 0 0 0 0 0 1 1 81
0c 0FF 0F 0 0 0 0 0 1 1 89
0d 0FF 0F 0 0 0 0 0 1 1 91
0e 0FF 0F 0 0 0 0 0 1 1 99
0f 0FF 0F 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 C9
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 A9
13 001 01 1 1 0 1 0 1 1 C1
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 D1
16 001 01 1 1 0 1 0 1 1 D9
17 001 01 1 1 0 1 0 1 1 B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
vesafb: framebuffer at 0xe8000000, mapped to 0x42823000, size 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1144945183.046:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 100x37
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel E7505 Chipset.
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 64M @ 0xf4000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x24a0-0x24a7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x24a8-0x24af, BIOS settings: hdc:DMA, hdd:pio
hdc: HL-DT-ST CD-ROM GCR-8482B, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Logitech Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 326k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Vendor: FUJITSU Model: MAS3735NP Rev: HPF2
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 4
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 180k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
ACPI: Power Button (FF) [PWRF]
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 185, pci mem 4385a000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 201, io base 00002440
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 193, io base 00002460
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
EXT3 FS on sda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]
Adding 2040244k swap on /dev/sda3. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Thanks and Regards,
HEMANT KUMAR
WIireless & Embedded Solutions Group
NET CENTRIC TECHNOLOGIES DIVISION
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
