Duncan Webb wrote:
> Hi all,
>
> I've got two questions problems that I've not been able to find an
> answer for by googling.
>
> 1) My keyboard mapping seems to change when I'm using multiple DirectFB
> sessions. The first session is the Freevo gui and the second session is
> mplayer after mplayer exits the keyboard mapping seems to have changed.
> The Up arrow becomes the left arrow key, etc. I'm using a UK Microsoft
> Natural Keyboard Pro. I tend to start from an xterm on one machine and
> the using a KVM switch change to the other machine, but I don't think
> the problem is related to this as the keys are correct after start up.
I think that I've got two keyboard drivers running, one from the input
and the other for the event device.
---------------------- DirectFB v0.9.25 ---------------------
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2004 convergence GmbH
-----------------------------------------------------------
(*) DirectFB/Core: Multi Application Core. (2006-12-02 21:08)
(*) Direct/Memcpy: Using SSE optimized memcpy()
(*) Direct/Thread: Running 'Fusion Dispatch' (MESSAGING, 26557)...
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 26603)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 26611)...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'LiRC Input' (INPUT, 26612)...
(*) DirectFB/Input: LIRC Device 0.2 (convergence integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 26613)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 26614)...
(*) DirectFB/Input: ImPS/2 Generic Wheel Mouse (2) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 26615)...
(*) DirectFB/Input: PC Speaker (3) 0.1 (convergence integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 26616)...
(*) DirectFB/Input: Logitech Logitech Freedom 2.4 (4) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 26617)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(!!!) *** ONCE [Joystick sends JS_EVENT_INIT events, make sure it has
been calibrated using 'jscal -c'
] *** [joystick.c:96 in joystick_handle_event()]
(*) Direct/Thread: Running 'Joystick Input' (INPUT, 26618)...
(*) DirectFB/Input: Joystick 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: Matrox G400 0.7 (directfb.org)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
SDL DirectFB_SetVideoMode: [EMAIL PROTECTED], flags: 0x00000000
>
> 2) I don't know if it is possible but I would like to run MAME.SDL using
> the directfb video driver and have the output going to the TV, I've tried:
> export SDL_VIDEODRIVER=directfb
> export SDL_DIRECTFB_MGA_CRTC2=2 (and 1)
> export SDL_DIRECTFB_MGA_STRETCH=1
Doesn't matter about the value to these MGA setting, they just turn on
the settings.
> export SDL_DIRECTFB_MGA_OVERSCAN=1
> But the output is going to the monitor and not the TV.
A bit strange about the TV, today it worked.
Duncan
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
