hi all...
i have just started to work on DirectFB..
i downloaded some examples from internet n tried
running then on my pc
but i m getting this error..
---------------------- DirectFB v0.9.25
---------------------
(c) 2000-2002 convergence integrated
media GmbH
(c) 2002-2004 convergence GmbH
-----------------------------------------------------------
(*) DirectFB/Core: Single Application Core.
(2006-12-11 11:16)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL,
2700)...
(*) Direct/Thread: Running 'Linux Input' (INPUT,
2707)...
(!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] ***
[ reactor.c:853]
(*) DirectFB/Input: AT Translated Set 2 keyboard (1)
0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT,
2708)...
(*) DirectFB/Input: ImPS/2 Generic Wheel Mouse (2) 0.1
(convergence
integrated media GmbH)
(*) Direct/Thread: Running 'PS/2 Input' (INPUT,
2709)...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence
GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT,
2710)...
(*) DirectFB/Input: Keyboard 0.9 (convergence
integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6
(convergence
integrated media GmbH)
(!) DirectFB/FBDev: No supported modes found in
/etc/fb.modes and
current mode not supported!
(!) DirectFB/FBDev: Current mode's pixelformat: rgba
6/0, 6/0, 6/0, 0/0 (4bit)
(!) DirectFB/Core/layers: Failed to initialize layer
0!
--> Initialization error!
(!) DirectFB/Core: Could not initialize 'layers' core!
--> Initialization error!
please help me regarding this issue...
i m using a intel 845G chipset...
my dmesg
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
fb1: Virtual frame buffer device, using 1024K of video
memory
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Detected 892K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
intelfb: Framebuffer driver for Intel(R)
830M/845G/852GM/855GM/865G/915G chipset s
intelfb: Version 0.9.2
intelfb: 00:02.0: Intel(R) 845G, aperture size 128MB,
stolen memory 892kB
intelfb: Mode is interlaced.
intelfb: Initial video mode is [EMAIL PROTECTED]
my grub.conf
title Fedora Core (2.6.13.5)
root (hd0,4)
vga=0x313
video=intelfb:[EMAIL PROTECTED],accel,hwcursor,vram=8,ywrap,mtrr=1
kernel /bzImage- 2.6.13.5 ro root=LABEL=/ rhgb
quite
initrd /initrd-2.6.13.5.img
my fbset -i
mode "640x480-60"
# D: 25.176 MHz, H: 31.469 kHz, V: 59.942 Hz
geometry 640 480 640 480 4
timings 39721 48 16 33 10 96 2
rgba 6/0,6/0,6/0,0/0
endmode
Frame buffer device information:
Name : VGA16 VGA
Address : 0xa0000
Size : 65536
Type : VGA 16 colors in 4 planes
Visual : PSEUDOCOLOR
XPanStep : 8
YPanStep : 1
YWrapStep : 0
LineLength : 80
Accelerator : No
please help me regarding this issue...
thanks a lot in advance
regards
Manu
____________________________________________________________________________________
Cheap talk?
Check out Yahoo! Messenger's low PC-to-Phone call rates.
http://voice.yahoo.com
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
