On Sonntag 21 Januar 2007 19:39, Mark Adams wrote: > > When testing this with my epia board, I'll get a solid pink video picture. > > Should this really work with a cle266 board ? > > It worked on my CLE266. It didn't work initially on the CN700: for > that you need to edit vidregs.h and change the definition of > V3_FIFO_MASK to: > > #define V3_FIFO_MASK 0x000000FF > > Also, on any non-CLE266 unichrome chip you'll need > unichrome-revision=17 in your .directfbrc (despite what > find_revision.sh might say). If you're getting colour problems on YUV > pixel formats, that's worth a try on any hardware (but shouldn't > affect RGB pixel formats). >
Thanks for your fast reply. At vdr-portal there is a report that it seems to work, in some way. The OSD is OK, but the video seems to be shifted one third ( 1/3 ) to the left, and colors seems to be wrong. Colour problem could be a side effect of shifted video. Link to screen shot (discussion is in german :-( ): http://www.vdr-portal.de/board/thread.php?postid=567755#post567755 > Some other tweaks may also have been required, I can't remember. > > Note that V3 only supports packed pixel formats (i.e. NOT YV12/I420). > > M. > -- Stefan Lucke _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
