Hi all,
I compiled and installed DirectFB-1.2.0-rc1on FC8, but when I tried to
run DirectFB-examples-1.2.0, it didn't work! Is there any problem? Pls
help!
The following is my steps:
$cd DirectFB-1.2.0-rc1
$./configure --prefix=/home/myname/test
$make
$make install
$cd ../DirectFB-examples-1.2.0
$./configure --prefix=/home/myname/test
$make
$make install
$cd /home/myname/test/bin
$./df_dok --dfb:system=x11
And it print out the message bellow, and display nothing! It seems the
program is waiting for somthing there.
~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.0-rc1 |~~~~~~~~~~~~~~~~~~~~~~~~
(c) 2001-2008 The world wide DirectFB Open Source Community
(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2008-07-02 02:25)
(*) X11/Visual: ID 32, depth 8, red 0x000000, green 0x000000, blue
0x000000, 8 bits/rgb, 256 entries
(*) X11/Visual: ID 33, depth 8, red 0x000007, green 0x000038, blue
0x0000c0, 8 bits/rgb, 8 entries
(*) X11/Visual: ID 34, depth 8, red 0x000000, green 0x000000, blue
0x000000, 8 bits/rgb, 256 entries
(*) X11/Visual: ID 35, depth 8, red 0x000000, green 0x000000, blue
0x000000, 8 bits/rgb, 256 entries
(*) X11/Visual: ID 36, depth 8, red 0x000000, green 0x000000, blue
0x000000, 8 bits/rgb, 256 entries
(*) X11/Visual: ID 37, depth 24, red 0xff0000, green 0x00ff00, blue
0x0000ff, 8 bits/rgb, 256 entries
(*) Direct/Thread: Started 'X11 Input' (4901) [INPUT OTHER/OTHER 0/0]
<10485760>...
(*) DirectFB/Input: X11 Input 0.1 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
--
Just do it!
_______________________________________________
directfb-users mailing list
directfb-users@directfb.org
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
