Niels Roest schrieb: > Frank Muenchow wrote: >> Niels Roest schrieb: >> >>> Hi Frank. >>> >>> DirectFBCreate(&dfb) has 2 'normal' cases where it will lock: >>> - you've build DirectFB in single-app-core mode and you are already running >>> a DirectFB app >>> - you are trying to start a slave DirectFB app but the master DirectFB app >>> is not init'ed yet >>> >>> Number 1 can be checked easily by adding something like debug=DirectFB/Core >>> to your config file. >>> you need fusion.ko for multi-app core. >>> >>> hth, >>> Niels >>> >> Hi. >> >> Thanks for that. I actually built DirectFB in single-all-core mode. Now >> I have the multi-app-core and I'm getting one step further: >> >> After starting mythfrontend -qws, I'm still not able to watch recordings >> etc. >> I'm even not been able to use dfbinfo, it hangs at: >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.3|~~~~~~~~~~~~~~~~~~~~~~~~~~ >> (c) 2001-2008 The world wide DirectFB Open Source Community >> (c) 2000-2004 Convergence (integrated media) GmbH >> ---------------------------------------------------------------- >> >> (*) DirectFB/Core: Multi Application Core. (2008-09-02 19:20) >> (*) Fusion/Init: Builtin Implementation is still experimental! >> Crash/Deadlocks might occur! >> > This line just above is signalling the issue. > Buildin multi-core is not maintained. You should use fusion.ko, the > kernel module. > First get this build/installed, and then you will need to run > ./configure again, > and make sure you don't see this in ./configure output: > "Linux-Fusion header not found. Using EXPERIMENTAL Builtin Multi > application core!"
Thanks for that. Now it's working! Just for information: One needs to build qte with the "directfb"-plugin (and not linuxfb) and then it works. :-) _______________________________________________ directfb-users mailing list directfb-users@directfb.org http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
