Hi, I installed the 1.2.6 as you suggested. But i had to follow the -Unable-to-disallocate-VT fix at the page http://blog.csdn.net/Analib/archive/2008/10/22/3124382.aspx to overcome the error conditions running on directfb.
I am not sure whether this is a legal way but i encountered with many people suffering from the same problem. Is there any official fix for it? With the change at the input.c file, links -driver directfb is working now. I had to also create the directfbrc file under /etc and add these lines to it. It was not installed after the installation. mode=1280x1024 depth=24 mouse-source=/dev/input/mice mouse-protocol=IMPS/2 I compiled the 1.2.6 source as follows: ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --sysconfdir=/etc --enable-debug -enable-zlib On Thu, Jan 8, 2009 at 12:09 PM, Niels Roest <ni...@directfb.org> wrote: > Hi, > don't know what's going on, > but know the fbdev driver had some bugfixes so you might wanna try the > latest stable 1.2.6. > > Oguz Yarimtepe wrote: >> >> Hi, >> >> I am trying to run some of the applications by using DirectFB. After >> googling a bit i enabled the framebuffer property at my Ubuntu Hardy. >> Here is the fbset and dfblayer outputs >> >> >> > > > -- > > .------------------------------------------. > | DirectFB - Hardware accelerated graphics | > | http://www.directfb.org/ | > "------------------------------------------" > -- Oğuz Yarımtepe www.loopbacking.info _______________________________________________ directfb-users mailing list directfb-users@directfb.org http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
