John,

Thanks for the response.   However I still cannot get it to show a "/dev/fb"
device.   The command "cat /proc/fb" is size 0.

When I add "vga=xxx" to the grub (v1.97.2) boot command, I get the following
response from grub, input first:

   - Input:
      - insmod ext2
      - set root=(hd0,3)
      - linux /boot/vmlinux-2.6.32.8-lfs-6.6 root=/dev/sda3 ro vga=789
      - boot
   - Output when the "linux" line is entered
      - vga=789 is deprecated.  Use set gfxpayload=800x600x24,800x600 before
      linux command instead.

And after the boot the "/dev/fb" device is not present.  So I tried the
following grub command:

   - Input:
      - insmod ext2
      - set root=(hd0,3)
      - set gfxpayload=800x600x24,800x600
      - linux /boot/vmlinux-2.6.32.8-lfs-6.6 root=/dev/sda3 ro
      - boot

Still no luck.   Here are my kernel .config settings related to FB

CONFIG_FB=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=y
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_VT_HW_CONSOLE_BINDING=y

Anyone have other words of advice?    Thank you in advance,
Ian

On Tue, May 25, 2010 at 12:08 PM, John D. Robertson <j...@rrci.com> wrote:

> Add 'vga=0x318' to your kernel boot command line, where you replace 0x318
> with
> the appropriate VGA mode:
>
> http://linuxandfriends.com/2008/09/17/vga-modes-used-linux/
>
> Regards,
> JDR
>
> On Tuesday 25 May 2010, Ian Harrold wrote:
> > All,
> >
> > This really isn't a DirectFB issue, but question on Frame Buffer support.
> > I created my own linux kernel using http://www.linuxfromscratch.org/lfs/
> > which uses 2.6.32.8.  However when the kernel boots up there is no
> > "/dev/fb" device.   When I try to run a directfb app it states the same.
>  I
> > have built the kernel with vesafb support.
> >
> > Any one have insight on what I am failing to do to create the fb device?
> >
> > Much appreciated,
> > Ian
>
>
>
> --
> =============================================================
> John D. Robertson, Computer / Engineering Consultant
> Robertson & Robertson Consultants, Inc.
> 3637 West Georgia Rd.
> Pelzer, SC  29669
>
> Phone: (864) 243-2436
>  Fax: (864) 243-3023
> Email: j...@rrci.com
>  WWW: http://www.rrci.com
>
_______________________________________________
directfb-users mailing list
directfb-users@directfb.org
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users

Reply via email to